| Product name |
1L Rotary Evaporator |
| Model |
N-1001T-WD |
| Cat. No. |
217019 |
| Type | With large size water and oil bath |
| Condenser | Dewar condenser glassware, nozzle OD 3/8" (10mm), OD
4 3/8" x 13 3/8" (110mm x 340mm), ID 3
5/8" x 9 1/8" (91mm x 230mm) |
| Rotaiton Speed | 20-180rpm |
| Motor | Induction motor 25W |
| Evaporating Capacity | 20ml/min Max (water) |
| Evaporating Flask | Pear shaped flask 1 liter NS 24/40 |
| Receiving Flask | Round bottom receiving flask 1 liter ball joint size 35/20 |
| Jack | Manual slide (water balance slide + extension slide) |
| Jack Stroke | 4 3/8"(110mm) + 5 7/8"(150mm)(weight balance slide + extension slide) |
| Rotary Joint (vapor duct) | ID 3/4"(18mm) x 7"(178mm) NS24/40 |
| Stand Base | T shape base 15 3/4"(400mm) x 12 5/8"(320mm) |
| Ultimate Vacuum | 4mbar(399.9Pa) or less |
| Vacuum Seal | Teflon + Teflon/Viton double seal |
| Safety Features | Fuse, independent over temperature cut off |
| Bath Temperature Range | 5ºC above ambient to 180ºC
|
| Accuracy | +/-1.5ºC (Oil: +/-3.0ºC) |
| Display | Digital set and readout, 1ºC intervals |
| Heater | 1kW (drum heating) for water and oil |
| Accessory | NVC-2100 Vacuum Controller (To view this product, please click here
|
| Teflon Seal Upgrade | 100% Teflon Seal is recommended for high temperatuer applications (To view this product, please click here
|
| Bath Size, Material, Capacity | ID 10"(254mm) x 5 3/8"(135mm)H, SUS 304, 7 liters |
| Additional Power Outlet | Max 1A |
| Ambient Operating Temperature | 5 to 35ºC |
| Dimensions | 21 3/5"(550mm)W x 15"(380mm)D x 28 3/4"(730mm)H, 38 3/5"(980mm)H Max |
| Power / Voltage | 1035VA / 115V, 60Hz |
| Weight | 28.8lb (13.lkg) |
